Charlotte, NC Electrical Designer Jobs - RSS Feed

Electrical Designer

Fri, 19 Sep 2008 02:58:28 +5000

Aerotek Energy Service has an opening for a Electrical Designer.

This position is for an experienced Lead Electrical Designer.

The Electrical Designer primary responsibility will be to direct and
supervise activities of designers and drafters engaged in physical layout design and creation of construction documents for electrical raceways, including cable tray, hangers, conduit, and underground duct bank systems
using Intergraph Microstation, Smartplant, and PDS.

The ...

Electrical Designer

Sun, 28 Sep 2008 01:20:50 +5000

Electrical Designer

Fri, 19 Sep 2008 04:59:31 +5000

Aerotek Energy Services is currently recruiting an Electrical Designer for an engineering firm that designs, builds, operates, and maintains power transmission and distribution facilities and systems throughout the country.

PRIMARY RESPONSIBILITIES

- Primary responsibility for the qualified Electrical Designer will be the physical layout design and creation of construction documents for electrical raceways, including cable tray, hangers, conduit, and underground duct bank syste...

Electrical Designer

Fri, 26 Sep 2008 01:21:41 +5000

Electrical Designer

Mon, 06 Oct 2008 22:16:58 +5000

Electrical Designer

Mon, 13 Oct 2008 17:25:28 +5000

A leading manufacturer in Charlotte, NC is looking to add an Electrical Designer to their team.

Responsibilities:

- Design, layout, and build/manufacture control panels

- Ability to quote jobs, run the project, layout components, schematics, drives, PLC's, HMI's.

- Work with purchasing to bring in the appropriate components

- Set and work under time lines

- Work with the shop to answer any questions on building the panels

- Test control panels. ...

Electrical Designer

Sun, 26 Oct 2008 02:45:51 +5000

A leading manufacturer in Charlotte, NC is looking to add an Electrical Designer to their team.

Responsibilities:

- Design and layout control panels

- Ability to quote jobs, run the project, layout components, schematics, drives, PLC's, HMI's.

- Work with purchasing to bring in the appropriate components

- Set and work under time lines

- Work with the shop to answer any questions on building the panels

- Test control panels.

- Work with...

Electrical Designer

Tue, 09 Sep 2008 06:31:49 +5000

Aerotek Inc. is currently seeking an Electrical Engineer in Charlotte, NC.

Job Duties are as follows:

Plan, Research, and conduct electrical PLC programming and engineering activities on new and existing lubrication equipment in the product line

Develop prototype PLC control schemes for the same

Set up and run lab evaluations of the control systems, calibrate the controls use with the mechanical systems

Work with suppliers and contractors as necessary to define...

Electrical Designer

Fri, 19 Sep 2008 04:56:06 +5000

Pro/E Designer - AutoCAD

Mon, 06 Oct 2008 20:11:37 +5000

Pro/E DesignerPro/E 3.0/4.0, ProE ProPiping, Framework Software Modules,AutoCAD 2000/2007, Industrial Electrical Instrumentation,Modular System Design, Fabrication Shop Practices
MONDAY-FRIDAY REGULAR BUSINESS HOURS
A leading piping company is continually in search of talented individuals willing to support the goal of high-quality products and customer service. More specifically, they are seeking a Pro/E Designer to work as part of a team as part of a Temp to Hire position.
Pos...

Electrical Engineer

Mon, 22 Sep 2008 11:28:57 +5000

Leading agricultural company is seeking electrical engineers. These individuals will be responsible for the following:

-Create electrical subsystem diagrams

-Vehicle electrical system drafting and analysis tool, VeSys, and AutoCAD platform

-Intelligent wires, components

-Logic links for control module simulation

-Simulate, analyze and correct errors

- Operate switches to simulate machine functions

-Set worst-case st...

Mechanical Designer

Tue, 02 Sep 2008 21:54:27 +5000

Immediate Opening For a Mechanical Designer With Growing Design and Manufacturing Company In Charlotte, NC

Perform design, solid modeling, and drafting using UG NX2, NX3, or NX4
Most of the design will be mechanical in nature but electrical experience would be a plus.

QUALIFICATIONS
5 years+ of up to Unigraphics (NX2 version) design experience
Teamcenter experience is a plus as well (this is a software they use to organize the CAD files)
Must have assembly and weldment...

UG NX2 Designer

Mon, 15 Sep 2008 06:26:48 +5000

A leading manufacturer is looking to add a UG Designer to their team. This will be a 6-12 month contract.

RESPONSIBILITIES:
- Performing design, solid modeling, and drafting using UG NX2.
- Most of the design will be mechanical in nature but electrical experience would be a plus.
- Must be willing to put in a good amount of overtime (at least 5-10 hours per week and occasional weekend work).
- Must be used to a fast paced environment.

Qualifications:
- 5 years+ ...

UG NX2 Designer

Fri, 31 Oct 2008 04:41:48 +5000

A leading manufacturer is looking to add a UG Designer to their team. This will be a 6 month contract with an outside shot of going permanent.

RESPONSIBILITIES:
- Performing design, solid modeling, and drafting using UG NX2.
- Most of the design will be mechanical in nature but electrical experience would be a plus.
- Must be willing to put in a good amount of overtime (at least 5-10 hours per week and occasional weekend work).
- Must be used to a fast paced environment.<...

Civil Designer/Drafter

Tue, 23 Sep 2008 18:40:27 +5000

Aerotek E&E has an opening for a Civil Designer/Drafter to work with one of our clients in Wake Forest, NC. Our client is an established full service mechanical engineering, electrical engineering, civil engineering, and land surveying firm.

Qualified Civil Designer/Drafter will have three years of experience with drafting and design dealing with land development. Working experience with LDD is required. Knowledge of and experience with Civil 3d is a plus, but not required. This posit...

UG Designer

Thu, 16 Oct 2008 05:11:45 +5000

Aerotek Inc. is currently seeking 3 UG Designers in Charlotte, NC for a short term contract. Duties are as follows;

Perform design, solid modeling, and drafting using UG NX2, NX3, or NX4
Most of the design will be mechanical in nature but electrical experience would be a plus

QUALIFICATIONS
5 years+ of Unigraphics (NX2 version) design experience

Teamcenter experience is a plus as well (this is a software they use to organize the CAD files)

Sheet metal experienc...

Gameplay Programmer - C++, Java

Fri, 12 Sep 2008 11:57:08 +5000

Gameplay ProgrammerC++, Java, Game Design
IF YOU ARE A GAME DESIGNER TRAPPED IN THE BODY OF A PROGRAMMER, WE'D LIKE TO HEAR FROM YOU!
The oldest U.S video game company still in the industry has a contract position available for a Gameplay Programmer.
Position Description:
Gameplay Programmers for Our Client have an intrinsic understanding of what makes a game fun, as well as the analytical mind to break that down into its constituent parts. They experiment with Game Design ...

Microstation Drafter

Fri, 19 Sep 2008 02:58:44 +5000

Aerotek Energy Services has an opening for a Microstation Drafter.

The Microstation Drafter responsibilities are to support their Relay and Control Group.

The Microstation Drafter must be fluent in Microstation and come with an Electrical background.

The Microstation Drafter must have experience in panel wiring, single line diagrams, relays is ideal.

The Microstation Drafter position will be located in Charlotte, NC.

The Microstation Drafter position will pa...