Adrian, MI Machine Operator Jobs - RSS Feed

Machine Operator

Tue, 02 Sep 2008 21:27:07 +5000

Manufacturing facility with a family like atmosphere is looking for Machine operators on 2nd shift.

Responsibilities:
- Will be assigned to different areas in the shop; may work in cnc tube bending, manual machines, wash tank, or thermal wrap areas.
- The will be trained in one area and may be asked to move to another as production schedules change.

This is a 2nd shift position from 2:30pm to 11:00pm Required Skills for Machine Operator Job: AUTOMATED MACHINERY About Ae...

Machine Operator

Mon, 15 Sep 2008 06:19:55 +5000

Plastic Injection Machine Operator

Mon, 22 Sep 2008 16:48:56 +5000

Aerotek Commercial is currently seeking Plastic Injection Machine operators. This person must have at least 3 years of experience operating Plastic Injection machines. Also, this person must be able to lift up to 50 lbs, This is a contract to hire opportunity that will pay $10.50/ hr. Required Skills for Plastic Injection Machine Operator Job: PLASTIC INJECTION LIFTING About Aerotek Commercial Staffing : Join Aerotek Commercial StaffingSM. We employ people in light industrial, light techn...

Devlieg Boring Mill Operator

Sat, 18 Oct 2008 18:37:48 +5000

A partner company of Aerotek in the Clinton Township area is seeking a Devlieg Boring Mill Operator. This person must have 5 years experience operating this machine, must be able to inspect, set up and operate this devlieg. This candidate should have there own tools and also be a team player. This position starts at 7 am and end at 4:30 PM.

If you feel you are a qualified for this position, please contact the necessary Aerotek representative. Required Skills for Devlieg Boring Mill Ope...

CNC Setup Operator

Sun, 26 Oct 2008 02:58:10 +5000

Our client, a prototype shop in Livonia is currently seeking a CNC setup operator on 2nd shift to setup cnc mills.

DESCRIPTION:
Responsible for machining a few parts at a time then will setup the cncs again for the next small batch - frequent setups
Very close tolerances
No programming

REQUIREMENTS:
Must have experience with OKK, Mori Seiki, Makino, and/or Fadals
Must have pneumatic controls experience

This is a long term contract to hire position. Hours ar...

CNC operator

Thu, 16 Oct 2008 03:53:34 +5000

There is a company in that has immediate needs for the Fraser and Mt. Clemens area. They are looking for qualified CNC machinists. This company is running 12 hour shifts and has opening on both first and second shift. Machinist must have at least 3 years of experience on CNC horizontal mills. Must also have at least 5 years of experience on FANUC controls for the setup and operation of the machine. All qualified candidates are encouraged to apply. Required Skills for CNC operator Job: FANUC C...

Boring Mill Operator

Thu, 16 Oct 2008 05:22:00 +5000

A company in the Roseville area is in the immediate need for Devlieg Boring Mill Operators. Candidates must be able to setup,operate and perform quality inspections on Devlieg Boring Mills working with prototype parts. Candidates must have 5-10 years of experience and also have their own tools. Required Skills for Boring Mill Operator Job: MANUAL BORING MILL MACHINE SETUP QUALITY INSPECTIONS PROTOTYPE PARTS DEVLIEG BORING MILL About Aerotek Commercial Staffing : Join Aerotek Commercial Staf...

CNC Operator

Thu, 16 Oct 2008 05:50:06 +5000

A company in the Fraser/Mount Clemens area is in the need for CNC Operators. Candidates must have the ability to operate CNC Milling Centers with Fanuc controls. Responsibilities will include own setups, tool changes offsets and inspections. The ability to understand G & M codes will be a plus. Must be able to work 12 hour shifts. Required Skills for CNC Operator Job: CNC MILL MACHINE SETUP FANUC CONTROLS TOOL CHANGES QUALITY INSPECTION About Aerotek Commercial Staffing : Join Aerotek C...

CNC Operator

Fri, 31 Oct 2008 06:18:42 +5000

Boring Mill Operator

Thu, 02 Oct 2008 23:51:15 +5000

A company in Clinton Township area is in the need for CNC Boring Mill Operators. Candidates will be responsible for operating, own setups, tool changes and offsets of operations. Must have between 3 and 5 years of recent experience and ability to work 1st or 2nd shift. Required Skills for Boring Mill Operator Job: CNC BORING MILL MACHINE SETUP TOOL CHANGES QUALITY CHECKS LIGHT PROGRAMMING About Aerotek Commercial Staffing : Join Aerotek Commercial StaffingSM. We employ people in light indust...

BENDER OPERATOR

Tue, 23 Sep 2008 01:39:20 +5000

Our client that manufactures exhaust systems located in Walled Lake is currently hiring bender operators to bend aluminum and stainless tubing.

DESCRIPTION;
- Setup automated benders per blueprint
- Load, operate, and unload equipment
- Quality checks

REQUIREMENTS;
- Previous automated bending experience
- Must be proficient with blueprints
- Must be able to pass drug test and background check

This is a contract to hire position. Hours are second shift 2:3...

CNC Operator

Fri, 19 Sep 2008 04:56:19 +5000

Injection Mold Operator

Mon, 15 Sep 2008 04:41:39 +5000

The candidate will be responsible for running injection molding presses. They will take the interior plastic components off of the machine, trim the excess flash, glue small pieces onto the components, add clips, and pack each part. They need to make sure that they document each part by signing their initials to assure that each component can be tracked properly. The environment is very fast paced.

Required Skills for Injection Mold Operator Job: PLASTICS EXPERIENCE IS A MUST Abo...

Production Operator

Tue, 09 Sep 2008 06:43:52 +5000

Looking for a qualified candidate to support Production in the 4 different areas in the shop.
Responsibilities: will be assigned to different areas in the shop. May work in cnc tube bending, manual machines, wash tank, or thermal wrap areas. The will be trained in one area and may be asked to move to another as production schedules change.

Must be able to lift up to 50 lbs repetitively.
Must live within a 25 minute drive.
High School Diploma is required.
Must pass ...

CNC Operator

Tue, 02 Sep 2008 21:54:58 +5000

A company in the Fraser area is in the need for CNC Milling operators with at least 3-5 years experience. Candidates must have the ability to setup, operate, and change tools of the milling centers using Fanuc controls. Knowledge of gauges would be a plus. Required Skills for CNC Operator Job: CNC OPERERATOR VERTICAL/HORIZONTAL MILLS MACHINE SETUP QUALITY INSPECTION TOOL CHANGES FANUC CONTROLS About Aerotek Commercial Staffing : Join Aerotek Commercial StaffingSM. We employ people in ligh...

Designer-UG

Tue, 23 Sep 2008 20:58:16 +5000

A supplier in the Metro-Detroit area is looking for a UGNX3 Designer.
Candidates MUST be proficient with UG NX3 and MUST have at least 5 years experience as a designer working with tooling. Specifically Cutting Tools

Below is the detailed job description

The Design Engineer will be responsible for designing Cutting Tools and Systems and related components according to customer and proposed concepts and/or given instructions, and compile parts lists for the designs and com...

UG Designer (NX3)

Tue, 23 Sep 2008 02:42:45 +5000

One of our clients a trusted leader in the metal cutting industry is looking for a UGNX3 Designer. Candidates MUST be proficient with UG NX3 and MUST have at least 5 years experience as a designer working with tooling. Specifically Cutting Tools.

The Designer has the responsibility to create designs for special tooling according to customer requirements. Main functions for the role include creating customer approval drawings by utilizing NX3, generating manufacturing drawings and models ...

UG Designer (NX3)

Mon, 15 Sep 2008 06:31:24 +5000

Designer-UG NX3

Tue, 09 Sep 2008 06:29:44 +5000

Candidates MUST be proficient with UG NX3 and MUST have at least 5 years experience as a designer working with tooling. Specifically Cutting Tools.

Below is the detailed job description

The Design Engineer will design Cutting Tools and Systems and related components according to customer and proposed concepts and/or given instructions, and compile parts lists for the designs and completed designs for manufacture.

Key Performance Areas:

The Design Engineer has...

General Labor

Fri, 03 Oct 2008 01:35:18 +5000

Aerotek Commercial Staffing is currently seeking General Laborers. This person must have at least 3 years of experience operating various production machinery and be able to use hand measuring tools. This is a contract to hire opportunity that will pay $10/hr. Required Skills for General Labor Job: HAND MEASURING TOOLS MACHINE OPERATOR About Aerotek Commercial Staffing : Join Aerotek Commercial StaffingSM. We employ people in light industrial, light technical and office support positions a...