Decatur, AL Jobs - RSS Feed

Inside Wire POTS Tip & Ring Technician

Thu, 17 Jul 2008 11:23:19 +5000

Volt Telecommunications Group, Inc. seeks Inside Wire POTS Tip and Ring Technician for Athens, AL. This is a "PART TIME" position. DO NOT assume we have your resume. To verify receipt of your resume call Gary Hensley at 888-640-6204. Candidates must have basic knowledge of Tip & Ring Plain Old Telephone Service (POTS). Experience with pulling, test and tone inside residential and customer inside premises wiring and forwarding dial tone from the Demarc to the actual telephone jack with tro...

Inside Wire POTS Tip & Ring Technician

Fri, 05 Sep 2008 09:11:24 +5000

Volt Telecommunications Group, Inc. seeks Inside Wire POTS Tip and Ring Technician. This is a "PART TIME" position. DO NOT assume we have your resume. Candidates must have basic knowledge of Tip & Ring Plain Old Telephone Service (POTS). Experience with pulling, test and tone inside residential and customer inside premises wiring and forwarding dial tone from the Demarc to the actual telephone jack with trouble shooting capabilities. Technicians must have a vehicle able to carry, secure and ...

CNC Machinists NOW HIRING

Tue, 09 Sep 2008 03:37:05 +5000

Are you tired of just having a job and not a career? Do you have the gift for operating and programming machines? Are you proud of your skills and would like to show them off? If so, then we have a terrific CNC opportunity for you in Elkmont, AL. For over 80 years, our client has been considered one of the world's leading global innovator, manufacturer and marketer of tools, diagnostics, and equipment. This multi-billion dollar company with offices in 23 countries is committed to providing e...

CNC Programmers Needed in Alabama

Fri, 12 Sep 2008 12:17:32 +5000

CNC Set-up / Programmers Needed Immediately

Are you tired of just having a job and not a career? Do you have the gift for operating and programming machines? Are you proud of your skills and would like to show them off? If so, then we have a terrific CNC opportunity for you in Elkmont, AL. For over 80 years, our client has been considered one of the world's leading global innovator, manufacturer and marketer of tools, diagnostics, and equipment. This multi-billion dollar company wit...

Procurement Agent

Sat, 02 Aug 2008 15:52:21 +5000

Are you experienced with procurement and logistics? If so, this is the position for you!

The qualified candidate will act as an authorized agent of the company with the responsibility to commit company resources through contracts and agreements for the procurement of goods and services. Will oversee supplier related activities and document procurement decisions, creates contract correspondence and administers contract changes between the company and suppliers. Ensures compliance wi...

Facilities Plant Engineer

Sat, 02 Aug 2008 15:52:12 +5000

Facilities Plant Engineer
The world's leading Aerospace company has an estimated 8-month contract position available for a Facilities Plant Engineer.
JOB DUTIES:
The Facilities Plant Engineer:

Provides Engineering support and conducts activities related to short- and long-term Infrastructure Planning and Capital Improvement Construction Projects and Maintenance Operations.
Advises and works with internal and external customers to analyze, design and complete Faci...

CNC Operators

Fri, 22 Aug 2008 20:21:09 +5000

Volt services is currently recruiting for CNC operators in the Elkmont, Alabama area. We are looking for individuals who understand and have experience with programming of machine.

If you have experience in operating a CNC machine, we would like to talk with you.

Volt is an equal opportunity employer and competitive benefits package is available.

...

Looking for a Warehouse Career?Call

Tue, 09 Sep 2008 03:37:00 +5000

Are you looking for a company that values its employees? Do you like being recognized for your hard work and dedication? If so, keep reading. If you like being bored at work, then this isn't the job for you. However if you thrive in a fast pace environment, enjoy learning new things, like working with your hands, then you'll love this opportunity. We are currently seeking Assembly and CNC Operators in Elkmont, AL!! To apply, contact a Volt representative today at (256) 341-5013.

As...

Property Administration

Thu, 09 Oct 2008 23:55:04 +5000

We are looking for A team player to come work in our Purchase and Property Department. We have excellent hours and great benefits. This is a temp to direct hire position.

You will maintain lease information, handle lease documents, maintain a central filing system, handle vehicle title and registration, maintain files on all current year fixed assets, and administer truck warranty claims. You will also be a back up administrator for credit cards, mail duties and all functions of t...

Calling All Warehouse Professionals

Tue, 09 Sep 2008 03:37:49 +5000

Do you have great warehouse or manufacturing experience? Are you a polished machine programmer? Do you have assembly experience? More importantly, are you tired of working for a company that doesn't value you as an employee? If so, then we might have the cure for you!! We have the positions, we just need a few good people to fill them!!

CALL TODAY TO APPLY FOR THE FOLLOWING POSITIONS:

**Assembly Workers

**CNC Operators

**Machine Programmers

Procurement Agent

Sat, 02 Aug 2008 15:48:23 +5000

We are looking for an experienced Purchasing Agent.

Job Duties: Acts as an authorized agent of the company with the responsibility to commit company resources through contracts and agreements for the procurement of goods and services. Oversees supplier related activities. Documents procurement decisions, creates contract correspondence and administers contract changes between the company and suppliers. Ensures compliance with all relevant Boeing procedures and contract requirements....

Electrical Facilities Plant Engineer

Thu, 25 Sep 2008 20:23:39 +5000

VOLT is looking for a successful candidate to fill the role of an Electrical Facilities Plant Engineer. In this position, the candidate will provide engineering support and conduct activities related to short- and long-term infrastructure planning and capital improvement construction projects and maintenance operations. Advises and works with internal and external customers to analyze, design and complete facilities construction projects and maintenance activities. The Facilities Plant Engi...

material Handler

Fri, 10 Oct 2008 05:32:50 +5000

Aerotek Commercial Staffing is now looking for qualified material handlers. Must have a high school diploma or GED. Must be able to become licensed on a forklift. Must be able to lift 30 lbs. Computer literate with basic math skills are a must. Must have at least 1 year experience in inventory control. Experience developing excel spread sheets desired but not required. Must have cost point experience. Required Skills for material Handler Job: INVENTORY FORKLIFT COMPUTER EXPERIENCE EXCEL COST ...

Nortel PBX Technician

Tue, 09 Sep 2008 06:35:01 +5000

Our client, located in Decatur, AL outside of Huntsville, requires a Nortel PBX Technician to join their team on a two month contract. This position has the possibility to go permanent or have the contract extended past the two month mark.

To be qualified for this position, candidates need experience in:
-Nortel PBX Option 11, 61, 81
-Symposium
-CallPilot
-ITG Trunks / VoIP
-Norstar / BCM

Additional experience in Cisco, PRI / DTI / NFASS, NARS / BARS / CDP are consi...

Admin/Clerical

Thu, 07 Aug 2008 21:32:23 +5000

Home Based Typist/ Data Entry We have several openings available in this area earning $300-$500 per week. We are seeking only honest, self-motivated people with a desire to work in the home typing and data entry field,from the comfort of their own homes. the preferred applicants should be at least 18 years old with internet access.There is a one time non refundable fee of $20.00 for the Training Materials Package. No experience is needed. However the following skills are desirable: ...

CNC Machinist

Fri, 03 Oct 2008 01:48:55 +5000

Aerotek Commercial staffing is now looking for a 2nd shift contract to hire CNC Machinist. Must have a high school diploma or GED. Must have experience in CNC machining operations, must have the ability to work within very close tolerances and have self inspection experience. Must have the ability to set up tooling and set offset. Skills required: read and follow-up procedures, as well as operate and adjust offset on multi-axis CNC controlled machines, as well as maintain machine logs, utilizat...

Electrical Engineer

Fri, 25 Jul 2008 02:56:33 +5000

An Engineering firm in the Huntsville/Decatur Alabama area is in need of an Electrical Engineer with a P.E. License. Qualified candidates will be well versed in power distribution, instrumentation, PLC's, lighting, and motor control systems. This firm is working heavily with chemical companies and industrial facilities and is seeking a candidate that has experience in these environments. The pay scale is open depending on experience. Qualified candidates should contact Brody Vail at (256) 890-27...

Electrical Engineer

Tue, 02 Sep 2008 21:25:28 +5000